Aquarium sump filter media separator.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filter separator for aquarium sump.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
An easy way to put different media types into your aquarium sump. Easy to scale to fit whatever size dividers you may have inside of your sump. I used Sunlu PLA+2.0 with 25 percent grid infill and 0 top and bottom layers. Experiment with different infill patterns to find one you may like better, I have been using this for a couple of months and they are holding up well. I did have to put 2 side by side to cover the whole span. If you have to do this also, make sure the legs line up on top of each other to make sure all the pressure is focused directly on the legs and not on an unsupported section.