Build Tray Modules Remix with Fillets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added fillets to make removal of bolts, nuts, etc easier
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 73
- Wydruki
- 1
- Wyświetlenia
- 592
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a very simple remix of @polymophic's Build Tray modules. I like the system — makes it easy to organize your workspace and have dedicated spaces for tools, nuts, bolts, spare parts, etc.
However, I found myself adding fillets to many of the modules, to make it easier to get small parts out of the modules. Others might find it useful too, so I'm uploading them here. Filenames follow the convention used by polymorphic.
Not all modules got modified. Some were too small for fillets to make sense. Note, not all modified modules are shown in the photos, only the ones I printed for my own use.
Everything was printed with PLA, 0.4 mm nozzle, 0.3 mm layer height, no supports. Any other material is fine too. With 0.3 mm layer height, the fillets and the outer round bottom edges are a bit rough but who has the time to print 0.15 mm layer height 🙂 Or use Prusaslicer's variable layer height option to smooth rounded surfaces out.