Cookie Run Kingdom logo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed so it's easy to change filament colors while printing!
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 241
- Wydruki
- 0
- Wyświetlenia
- 1332
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
The granddaughter is into this game, so I thought I'd recreate the logo as a backpack zipper fob. I imported the logo as an image then manually traced it in Fusion 360. I adjusted the layer heights so you can do manual filament changes and make it a close color match to the original. Base is red, next is black, then yellow. I scaled it down by about 30% in the slicer, and then increased the Z height to 10mm. This way I still had plenty of layers to play with, especially since yellow needs several layers or it's more green/yellow. My color photo is the first version before I tweaked the layer height so the “Kingdom” text was as high as the “Cookie Run” text. This made the yellow more, well, yellow.
After slicing I previewed the slice and made note of when to change colors and inserted the change filament command. I'm also going to print a couple in white so the granddaughter can paint them.
Two versions: “With Tab” and “No Tab.” The tab version has a tab with small hole for a keyring or string so it can be hung from a keychain, backpack, etc.