1 / 3
BLUM Tandem and Movento drawer rear notch jig
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small jig to dril the drawer notches at the back of BLUM undermount drawers.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 241
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
A small jig to dril the drawer notches at the back of BLUM undermount drawers. Suitable for Blum Tandem and Movento undermount drawers.
The jig also has a depth setting of 10mm. Use a drill collar or just a simple piece of tape to set the depth.
It is designed to print on its side.