1 / 5
Mikrotik RB5009 0.5U Mini-Rack 10-inch Ears — zdjęcie 1
1 / 5

Mikrotik RB5009 0.5U Mini-Rack 10-inch Ears

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

0.5U Mini-Rack ears for the Mikrotik RB5009 that support the 2-pin terminal Power connector on the left.

Ocena
4 / 5
Polubienia
5
Pobrania
50
Wydruki
1
Wyświetlenia
266
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The objective of this design, was true 0.5U mini-rack ears, that accommodate the 2-pin terminal connector on the side.

Printing

  1. The included part is for the left side.  Mirror it in your slicer to print the right side.

  2. Orientation: Front face down on print bed.

  3. Material: PETG

  4. Supports: Yes, organic.

  5. Infill: I used 25%, I haven't tested others.

Mounting

  1. I used the included M4x8mm hex button/rounded head bolts from the Mikrotik RB5009 ears kit - see the bottom of the RB5009 for what bolt head would be supported.

  2. I've heard it can be mounted without screws.

Tagi