Kwikset Tail Cap - Key Retaining Loop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Kwikset tail cap with loop to tie a key onto so they don't get separated
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have bunches of practice locks for people to use at locksport events; but it has always been a nightmare trying to keep any lock with the ONLY key that will re-open it.
Hopefully now, if the Key disappears the Lock will go with it!
This tail cap has a pyramidal shaped loop to enable easy printing on any printer without supports. The triangular notch in the base allows room for the spring loaded pin to engage the lock's screw cap notches as originally intended.
Mine are printed from ASA due to its impact resistance and temperature stability which makes them sturdy enough. I'll be printing a pile of these to give away along with stickers and key chains at locksport events!