Spoke Nipple Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spoke nipple clamp used to replace a broken spoke without replacing the spoke nipple on a bike wheel
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 211
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Overview
This is a spoke nipple clamp, similar to this one by Wheels MFG
The design is ideally used to replace a spoke, without the need for replacing the nipple or alternatively, having the nipple fall into the rim. This design uses an M3 fastener as the clamp, but can be used without it.
Alternative designs
Additionally, I have found some alternatives outside of Printables which can be found below:
https://www.thingiverse.com/thing:7333255
Print Settings
For multiple uses, I would suggest the following settings
PETG/ABS/PC/ASA - 40% infill, 4 perimeters, 0.1mm layer resolution