1 / 3
Unifi PoE+ Injector and Flex Mini 2.5G switch 10-inch Rack Mount — zdjęcie 1
1 / 3

Unifi PoE+ Injector and Flex Mini 2.5G switch 10-inch Rack Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Unifi PoE+ Injector and Flex Mini 2.5G switch 10-inch Rack Mount

Ocena
0 / 5
Polubienia
3
Pobrania
29
Wydruki
0
Wyświetlenia
224
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A 10-inch rack mount bracket for the Unifi PoE+ 30w injector and the Flex Mini 2.5G (USW-Flex-2.5G-5). This will ONLY fit the 30w injector, I designed it with the 1G version, but the 2.5G version should also fit. Different wattages has different dimensions, which is why I created this model in the first place.

The 30W injector shell is slightly tapered on the the front and back, which is why there is a gap at the faceplate. But the overall fitment is quite tight, it may get stuck on the feet , if so, give it a slight tap.

Original author requires support for the bridges at the back, but I got the bridge to be of decent quality without support while testing fitment. So I would say support is optional but recommended.

Author recommends a heat resistant filament and they used ABS, I printed mine in PETG but have to give it some time to test.

Tagi