1 / 3
Tainted Grail: The Fall of Avalon - Player Board — zdjęcie 1
1 / 3

Tainted Grail: The Fall of Avalon - Player Board

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple player board for playing tainted grail. The cover holds all the player stats and cards.

Ocena
0 / 5
Polubienia
0
Pobrania
7
Wydruki
0
Wyświetlenia
91
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

INTRODUCTION

This is a simple player board for Tainted Grail: The Fall of Avalon. It holds the player board and tokens / cards for that player. When done playing you can put the lid on and it holds the cubes and cards in place for easy setup next session. I've been wanting to create this since this game came out. I finally found the time.

PRINTING

This is a fairly easy print. The art on the cover is a separate STL. When the cover and art are loaded into your slicer together they should be aligned. This makes color selection easy as all you have to do is change the color of that object. I've now come to prefer thus method as it allows you to adjust print settings for the text and graphics only, such as slowing down, and allows the main model to keep the same speeds.

The filament used in the pictures was Overture Matte Light Brown PLA for the main parts and Prusament Galaxy Green PLA for the art details and text.

MAGNETS

   The bottom and cover are held together with tiny magnets. I used N52 cylindrical magnets, 2mm diameter x 1mm high. These are the ones I used: https://www.amazon.com/dp/B0FNX14SKB

    I glue the magnets in place with Zap-A-Gap Medium CA+ glue. 

   These magnets are TINY! Placing them by hand is practically impossible. After struggling with needle nose pliers for a bit, I designed and printed a simple insertion tool. You can find the model here:

Tagi