Garmin inReach Mini 3 to Garmin Mounting Spine Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for use with a silicone case. Clearance is provided between the adapter and the back of the device; add a thin
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
Description
This adapter allows the Garmin inReach Mini 3 / Mini 3 Plus to be mounted on the original Garmin Mounting Spine system.
The design is intended for devices used with a silicone protective case. A small clearance is intentionally left between the adapter and the back of the device to accommodate the case. For the best fit, it is recommended to place a thin piece of soft rubber or foam between the adapter and the device.
To improve rigidity, the adapter uses two mounting points:
the original mounting screw,
the lanyard attachment point, where a locking hook provides additional support and reduces bending load on the screw.
The model was designed with a slight preload. Depending on printer calibration, material shrinkage and printing accuracy, minor fitting or light sanding of the locking hook may be required for the perfect fit. This is normal for functional 3D-printed parts.
The strength of the adapter depends on the printing material, print orientation and print settings. Higher infill and good layer adhesion are recommended for maximum durability.
The STL model is provided with relatively high mesh resolution to preserve the original CAD geometry.
This is an original design created from scratch and tested on a real Garmin inReach Mini 3 Plus device.