Mountain Bike Fork tools handler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple assembly to handle small tools into a mountain bike fork Fits for 30 or 32 mm holes.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Assembly
Insert the fork tools handler into the hole of the bike fork. Tighten the knob, and you're good to go!
Note: Assembly requires inserting the nut into the wedge slot and tightening with a 4mm hexagonal screw (don’t forget to insert a locknut on knob before)
Disassembly
Simply unscrew and push to remove.
Important Warning
Do not overtighten or screw outside of the fork, as this may cause the part to break.
Material
PETG
P.S.
Wrap tool in bubble wrap to prevent fork rattling.
Designed and tested independently, this project would not have been published without the feedback and discussion at Sport Brugger Sölden.
Visit https://www.sport-brugger.at/
Use at your own risk. I am not responsible for any issues, damages, or injuries resulting from the use or assembly of this model. This design is provided without any guarantees.