SKRMod Rear Fender Tail Light Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed from https://www.thingiverse.com/thing:6075028. I used the bracket that holds the led bar and the amazon link…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Remixed from https://www.thingiverse.com/thing:6075028. I used the bracket that holds the led bar and the amazon link he provides to the led bar in the remix linked.
This mount uses the 4 pegs on the skrmod surron rear fender and is designed to be screwed into those pegs, but I'm using 3m tape since it seems like it will hold fine and I didn't wanna find m6 or something screws lol. The led is angled down 10 degrees, but I might angle it more depending on visibility when I get a chance to look at it more. Slide the LED mount into the 2 bridges, feeding the wire through the routing first. The wire should be able to slide into the under-seat cover, and it's easily wired into the stock connector from there. I added a switch into my tail wiring so I can toggle between the amber and red on the tail light. The mount / switches for that can be found at https://www.thingiverse.com/thing:7033839
1 month update: The 3M tape did not hold lol. I used two M5x12mm cap head screws to screw it into the fender for more solid mounting and seems like its holding well
Category: Electronics