FPVSupplyCO Kronos Arm Guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed up a bit of an arm guard for the Kronos as there is no motor protection. Snaps around the arm and has a…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Designed up a bit of an arm guard for the Kronos as there is no motor protection. Snaps around the arm and has a single point to protect the front and back. Screwed in by the 2 motor holes. Bit of a bevel on the bottom of the arm so supports are needed but they pop right out after it's done printing. I'm using 100% infill but have yet to test it.
NOTE: You have to mirror the object as 2 arms are left-wise and two arms are right-wise. most slicers let you mirror it so mirror it in the opposite direction.
Print Settings
Printer Brand:
Artillery
Printer:
Artillery Sidewinder X1
Rafts:
No
Supports:
Yes
Infill:
100%
Notes:
TPU should work but I like PETG as it doesn't act as an eraser if you slide against asphalt or another material.
Category: R/C Vehicles