1 / 3
Umbrella/parasol adapter for IKEA Nämmäro outdoor table — zdjęcie 1
1 / 3

Umbrella/parasol adapter for IKEA Nämmäro outdoor table

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter foot to add an umbrella to the IKEA Nämmäro table limiting the number of holes you have to cut in it to one.

Ocena
0 / 5
Polubienia
1
Pobrania
1
Wydruki
0
Wyświetlenia
26
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I wanted to add an umbrella to my IKEA Nämmäro outdoor table which isn't something the table is designed for. To avoid having to put two perfectly lined up, perfectly straight holes in it I designed this adapter which fits over the foot at the bottom and takes the base of a Högön (or other 38mm diameter) table parasol.

The gaps for the wooden legs are intentionally a touch loose to make it easy to slot in to place and allow for any misalignment/movement in the positioning. This does mean it may not sit perfectly straight, I'm fine with this but if it bothers you you may want to tighten up the tolerances.

This was printed in PLA+ as it was what was in the printer at the time and I'm lazy, PETG would be more suitable as it has a higher heat deflection temperature and is less hygroscopic.

NOTE: you have to drill a hole in the top of your table to slot the pole into place.

Please forgive the condition of the table in these pictures, it desperately needs fresh stain applying.

Tagi