1 / 9
Cascadia Market Rack + 3D Wildlife Tokens — zdjęcie 1
1 / 9

Cascadia Market Rack + 3D Wildlife Tokens

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A two-in-one Cascadia upgrade: a market-row display rack that holds the four face-up habitat tile + wildlife token…

Ocena
0 / 5
Polubienia
1
Pobrania
6
Wydruki
0
Wyświetlenia
47
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution

A two-in-one Cascadia upgrade in a single download: the market-row display rack, plus the full set of five sculpted 3D wildlife tokens that drop right into it.

The rack

Each turn you draft one of the four face-up habitat-tile + wildlife-token pairs. This rack holds all four on a gentle 15° slope so the whole market reads at a glance:

  • Habitat tile sits proud in a shallow hex recess, held from sliding by a rounded lip on its downhill edge, with a finger scoop under the uphill edge to flip it out.

  • Wildlife token drops into a Ø19 cup that fits both the official ~18 mm wooden discs and the 3D animal tokens below.

Fits a 42 mm flat-to-flat tile out of the box. Prints flat, one part, no supports.

The tokens

Five sculpted animals that replace the flat wooden discs — one STL each:

  • bear_token.stl — bear

  • elk_token.stl — elk

  • salmon_token.stl — salmon, leaping out of a splash (17 mm tall, same height as the bear and elk so it is just as easy to pick blind from the bag)

  • salmon_flat_token.stl — salmon, the original low-profile swimming version (8 mm) if you prefer a flatter token

  • falcon_token.stl — hawk

  • fox_token.stl — fox

Each animal is fused to a Ø18 mm base disc — the same footprint as the official token — so it seats in the rack and anywhere the wooden disc went. A full game uses 20 of each; print as many as you need. Print each species in its wooden-token colour (bear brown, elk tan/grey, salmon pink, hawk blue, fox orange) and the set reads at a glance — no AMS, no paint.

Print

  • Bambu Lab P2S or any 0.4 mm FDM

  • 0.2 mm layer height, 3 walls, 15 % infill, PLA

  • Rack prints flat (low edge at front); tokens print upright on their flat base. No supports anywhere.

Parametric OpenSCAD source for the rack (market_rack.scad) and the token base disc (token_base.scad) is included.

Fan content for Cascadia by Flatout Games / AEG — not affiliated.

Tagi