Fireball Tool Stud Pin Gridfinity Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Gridfinity holder for the 3/4" stud pins from Fireball Tool.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a basic Gridfinity tray to hold spare stud pins from the Fireball Tool 3/4" fixturing system, part number FA75-PNB768-4BDK. I looked at different sizes of trays, and to be honest, I would have preferred to pack them in a little more tightly. But 9 pins in 2x2 squares seemed to be the best compromise between space efficiency and ease of grasping the pins.
Like my other Gridfinity models, the base is altered to accept 6x3 magnets as a press fit, with the upper surface of the magnet holes modified to make the slicer bridge across correctly for a clean result. The unit pictured was printed out of Overture PLA on my Bear upgraded Mk3S+, using a 0.6mm nozzle, at 0.3mm layer height.