U.B. Funkeys Hub - FunkeyShifter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable FunkeyShifter Super Hub case for a U.B. Funkeys MegaByte replacement
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- GNU General Public License v3.0
FunkeyShifter is a printable replacement for the original U.B. Funkeys MegaByte hub.
This “Super Hub” can work like a normal standalone portal with physical Funkeys placed on top, using pogo pins to read the figure contacts. It also adds a Bluetooth control mode, letting you pick Funkeys from the web interface on your computer or phone, including Funkeys you do not physically own.
The printed case houses the electronics and contact pins needed to build the hub around an ESP32-S3 Super Mini. Once assembled and flashed with the FunkeyShifter firmware, it connects to the game over USB like a MegaByte-style hub, while the optional web interface controls it over Bluetooth.
Required hardware
ESP32-S3 Super Mini
4x 220k ohm resistors
Pogo pins for the Funkey contact pads
8x 8x4mm Neodymium magnets
Wire and soldering supplies
Printed case parts
Firmware, web controller, and build details:
https://github.com/jLynx/FunkeyShifter