Starseeker E55 / E55 Pro Coffee Grinder 51mm Portafilter Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of @Auback_945221's portafilter holder design for the Starseeker E55 to fit Delonghi's 51mm Portafilter size.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 37
- Wydruki
- 1
- Wyświetlenia
- 232
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I liked @Auback_945221 's portafilter design for the Starseeker E55, but I wanted it to fit my Delonghi style 51mm portafilter.
As the original design was designed for a generic 58mm two ear portafilter, the design is suboptimal for a 3 ear portafilter, but still functions as intended. The cup also (just) fits in between still.
As per the original design, print with PETG or ASA, as PLA is too brittle. Refer to the original post for detailed print and support settings.
I used two M5x16 socket head cap screws in the original holes but any M5x16 should do.
As I have zero CAD experience, the file is not perfect and was edited in Blender, hence some funny geometry. But hey, if it works...
Might tweak the design a bit in the future so it better accommodates the stock dosing cup, might not.