Forclaz 400ml Titanium Mug Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
9g 3D printed lid for the Forclaz 400ml titanium mug. Turns it into a sealed travel cooking kit. Vase mode, no supports.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 1
- Wyświetlenia
- 746
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
A lightweight lid for the Decathlon Forclaz 400ml titanium mug (also sold as the Quechua MH500 in some markets).
The mug fits a BRS stove, a lighter, and a 100ml gas canister inside - this lid turns it into a fully enclosed travel cooking kit.
Weight: 9g
Print time: ~41 minutes
Mode: Vase/spiral (recommended) - single wall shell, no infill, no supports
Wall: 0.8-1mm
Material: PLA
Nozzle: 0.4mm
Layer height: 0.2mm
Fit notes:
Inner diameter: 91.6mm - sized for the Forclaz 400ml. May not fit other mugs. Rim lip radius: 1.5mm - the lid clicks snugly over the rim.
The model is exported as a solid. In your slicer either use vase/spiral mode or set 1-2 perimeters, no infill, no top layers.
Designed in FreeCAD 1.1.1.
If you like my designs do not hesitate to visit my YT channel :) - @taboretum
If you find it useful feel free to buy me a coffee!