NR200 steam contoller with puck holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have an NR200 and wanted to mount my steam controller.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Also remixed from ivtue's excellent NR200 controller holder found here: https://www.printables.com/model/541806-nr200-controller-holder
I kinda just mushed the two together and filled some holes to get the design you see now.
There is a hole left in the bottom so you can route cables from underneath or on top, id suggest a short USB cable from the front 2 usb ports into the top of the puck.
Print on its side with supports. Printed in PLA with 3 walls and 25% infill. The front of the case doesn't get that hot so it should be fine.
The controller feels stable in the dock.
Can also sit against the side panel if want to hang it off the side as well.