Airstream LED Diffuser Covers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Diffuser covers for LED lights
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Public Domain
These LED diffuser covers block out the extremely bright LEDs and still provide plenty of light for reading, etc. Push on gently to install. To remove, rotate the diffuser cover clockwise while pulling. This will ensure the metal ring around the LED light does not come off. If one of the covers is a little loose, place a small strip of electrical tape along the inside edge.
The covers should be printed in PLA Basic Jade White (10100) to get the necessary transparency. Other light color filaments could also be used depending on the effect you are after. The gray outside border helps the cover blend in with the aluminum LED light housing. Recommend printing with a fuzzy skin texture to remove seams.