Mirror Hanger - Do not wash PPF
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Car Rearview Mirror Hanger – Do Not Wash (PPF film)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Costume Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
A rearview mirror hanger designed to warn service staff not to wash the vehicle. Ideal for service centers, dealerships, detailing shops, or tire shops where a complimentary car wash may be performed.
Available Versions
MMU Version
Full-color print with front and back text.
Prints as a single model on multi-material printers (MMU3, XL, AMS, etc.).
Color Change Version
Designed for standard single-extruder printers.
Print with a 0.15 mm layer height.
Start with Black filament.
Change to White at 1.4 mm.
Change to Red at 1.7 mm.
If you also want the rear warning text, print the included back plate separately and glue it to the hanger using CA (super glue) or a similar adhesive. If the rear warning is not needed, simply print the front part only.
Recommended material: PETG or ASA. PLA is not recommended for use inside a parked car (but it works).