Freezer Vent Wedge — Thetford T2138 Fridge (Adria Twin 2024 + others)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple clip-on wedge that props the freezer compartment door ajar so it can breathe while your van is in storage
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
If you leave a fridge or freezer sealed shut for weeks in storage, it goes musty and mouldy. Most campervan fridge doors have a built-in "vent" catch that holds the main door slightly open for exactly this reason — but the internal freezer compartment door doesn't, so it stays shut and stale.
This little wedge fixes that. It hooks over the edge of the freezer door and holds it ajar, letting air circulate through the freezer while the van sits unused. Pop it on when you park up for the season, take it off when you're back on the road.
It's designed around the Thetford T2138 — the 138 L / 11.6 L-freezer 12 V compressor fridge from Thetford's T2000 series (developed from the T2090). I fitted mine in a 2024 Adria Twin, but the same fridge is used across a range of other coachbuilt vans and caravans, so there's a good chance it'll suit yours too. If your van has the T2138 (or a close relative in the T2000 range), this should fit.
The main thing that sets it apart: it holds the freezer door open without compressing the door seal. A lot of vent spacers work by wedging into the gasket and squashing it — do that for months at a time and you're slowly wrecking the seal. This one lets the door rest open on its own edge instead, so the gasket keeps its shape. Should help the seal last longer.
Why you'd want one
Keeps the freezer vented and mould-free during storage
Clips on and off in seconds — no tools, no marks
Doesn't squish the door seal (unlike typical vent spacers), so it's kinder to the gasket long-term
Prints in well under a couple of hours with no supports
Print it in a bright colour so you don't forget to remove it before you next load the freezer
Fitment notes
Confirmed on the Thetford T2138 in a 2024 Adria Twin.
Likely to fit other vans/caravans running the same T2138 or T2000-series fridge — if you've fitted it to a different model, drop a comment so I can add it to the list.
If you're unsure, compare your freezer door thickness/edge to the photos before printing, or scale to suit.
Version to prop open the fridge door as well:
https://www.printables.com/model/1783391-fridge-freezer-vent-wedge-thetford-t2138-adria-twi