Printrbot Simple Metal E3D Hotend Mount with Fan Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces stock UBIS hotend for one with E3D style of mount. has mount for 3030 fan.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this mount after having issues with the spacers others have made for the Printrbot Simple Metal. The spacers others have made barely leave any room for the UBIS mount to grip onto a V6 style hotend. This was created to help fix all that. I've been printing with this new mount for over a month with absolutely no issues.
You will need to split this model in your slicer. The 3mf file I uploaded shows the recommended orientation for the two halves.
The main piece with the round insert will need 3mm heat set inserts. It also has a bore hole that is designed for a PFTE tube for 1.75mm filament. You may need to drill that bore out to the diameter of your tubing. You will also need 3mm heat set inserts for the 30x30 fan mount
Don't cut the PTFE tubing till you have the hotend in the mount. (so you get the length just right.)
PLEASE NOTE: The .3mf file is set up for a Printrbot Simple Metal running a BTT SKR Mini E3 V2 board and Klipper. If you are running a different setup please use the STL file instead.