1 / 4
D Cell x3 to 18650 x2 Serial adapter 7.5v for 5 Cell Maglite Bulb — zdjęcie 1
1 / 4

D Cell x3 to 18650 x2 Serial adapter 7.5v for 5 Cell Maglite Bulb

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This allows a 3x D-cell 4.5v series device to use 2x 18650 batteries at 7.5v DO NOT USE WITH A 4.5V (3 cell) BULB. It…

Ocena
5 / 5
Polubienia
11
Pobrania
109
Wydruki
2
Wyświetlenia
925
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution

This allows a 3x D-cell 4.5v series device to use 2x 18650 batteries at 7.5v

DO NOT USE WITH A 4.5V (3 cell) BULB.

It will immediately burn out unless the 18650 batteries are quite low to make 5v.

I found a "4,5,6 Cell" LED kit at a yard sale for cheap but only had a 3 Cell Maglite with too low a voltage output, so FTJIPI. Hotrodded my "little" Maglite.

This is a remix from https://www.thingiverse.com/thing:398515

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

0.4

Infill:

20%

Filament: Inland PLA+ Red


Notes:

Any material does the trick.

Category: Sport & Outdoors

Tagi