1 / 1
Sereed Balance Bike Seat Extension — zdjęcie 1

Sereed Balance Bike Seat Extension

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

2 inch seat extension for Sereed balance bike. Needs additional hardware for mounting.

Ocena
0 / 5
Polubienia
5
Pobrania
20
Wydruki
0
Wyświetlenia
125
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Seat extension for Sereed  balance bike.  My kid loves this bike to scoot around the house, but it's too short for him.  This adds about 2" to the existing seat.  Uses M5x70mm bolts to mount the old seat mount to the frame through the extension.  

There was an attempt to make this work with shorter bolts and a nuts that could be pushed through the side. I determined the longer bolts are probably more secure as it provides a solid connection from seat to the frame.  If you want to use shorter bolts and M5 nuts, slide the nuts through the side then use M5x20 bolts to attach to the bike.  Then use the existing M5 bolts that came with the bike to attach the seat to the extension.  I haven't tested this, so let me know how it works.  

Print with 0.2mm layers, 4 walls and 20% infill.  

Tagi