RS03 Suspension Arm Bearing Support Upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
RS03 chassis upgrade adding 8 ball bearings to suspension arms for smoother operation and reduced play. Manual included.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
RS03 Suspension Arm Bearing Support Upgrade
This is an upgrade part for the RS03 Chassis, designed to add ball bearing supports to the suspension arms (both front and rear) to ensure smoother movement and reduce play.
A detailed assembly manual is included as a PDF in the files BEARING_ASSEMBLE_MANUAL.pdf).
Overview
This mod replaces the original suspension arm bases and buckle plate with bearing-supported parts.
It requires 8 pieces of ball bearings (Inner: 2mm, Outer: 5mm, Length: 2.5mm).
What to Print
Front:
front_arm_base_v2.stlx 1front_buckle_v2.stlx 1
Rear:
rear_arm_base_f.stlx 2rear_arm_base_b.stlx 2
Hardware Required
Ball Bearing (2x5x2.5mm) x 8
Original M3 screws and 2mm suspension shafts from the RS03 chassis.
Assembly Instructions
Please refer to the attached PDF manual BEARING_ASSEMBLE_MANUAL.pdf) for the step-by-step assembly guide.