Tetrahedron Sculpture
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An angular tetrahedron sculpture.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 14
- Wydruki
- 1
- Wyświetlenia
- 107
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Made this playing around in Blender. It is composed of 14 pieces, 4 corner, 4 face, and 6 edge. The tolerances are tight and it will require a decent amount of force to connect the edge pieces to the corner pieces. Some grease may help. I recommend printing with .12mm layer height. To assemble:
Assemble 2 edge pieces and three corner pieces.
Insert a face piece in the at the center of the three assembled corner pieces. It will require a small bit of force to push into place, and should feel like it snaps into place.
Attach a third edge piece, completely surrounding the face piece. You should now have one face of the tetrahedron completed.
Attach one more edge piece and one more corner piece.
Attach two more face pieces next to the last added edge.
Attach one more edge piece.
Attach the last face piece.
Attach the last edge.