Costco Kirkland Signature UltraClean Laundry Cup/Drip Catcher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cup Holder/Drip Catcher for the Costco Kirkland Signature UltraClean 146 Loads 5.73L Laundry Detergent Bottle
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 29
- Wydruki
- 2
- Wyświetlenia
- 89
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a laundry bottle cup holder/drip catcher. There are many other models like it but this is specifically designed for the Costco Kirkland Signature UltraClean 146 Loads 5.73L Laundry Detergent Bottle.
This allows you to rest the laundry detergent cup under the spout. But also it catches any drips.
Print in PLA or PETG. Snug supports. 0.2mm layer height.
To install, remove the laundry cup first. Then turn the print horizontal with the hole aligned to the spout. Push in and then turn the print downwards. The "tabs" on the sides should hold the print in place.