Costco Kirkland Signature UltraClean Laundry Cup Drainer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cup Drainer for the Costco Kirkland Signature UltraClean 146 Loads 5.73L Laundry Detergent Bottle
- Ocena
- 3 / 5
- Polubienia
- 4
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 110
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a laundry detergent cup drainer. There are many other models like it but this is specifically designed for the Costco Kirkland Signature UltraClean 146 Loads 5.73L Laundry Detergent Bottle.
This allows any remaining detergent in the cup to drain back into the bottle from the top.
Print in PLA or PETG. 0.2mm layer height. Snug or Organic supports.
The screw section is print in place. If you are going to slice it yourself, make sure to put a cylindrical support blocker around the screw section. Otherwise, use the .3mf file and import as a project to have that done for your already.
To install, remove the top screw cap of the laundry bottle. Screw the print into place while holding it upright.