Dual Tetrahedron
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A plastic copy of a rare wood puzzle
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial
This four-piece puzzle was crafted in wood by Wayne Daniel around 25 years ago. I have reproduced the puzzle using 3D printing.
The puzzle consists of two copies of each piece, I modeled it using BurrTools. You can print the pieces in a single color, or in two colors. Even printing the pieces in a single color is not easy. Supports are required, one piece has a vertex which (almost) touches the print bed. The Bambu Studio 3MF file shows how I oriented the pieces for printing in two colors.
The two pieces are found in the files p1* and p2*. The file p1yellow* is an stl file of only the part of piece 1 which is the second color, and similarly p2yellow* for piece2. In the copy shown in the photos the main color is blue with the second color green.
Assembly is simple but very confusing. So maybe not so simple until you figure out how the pieces can possibly interlock. It is very different from a standard cube-based burr. The entire puzzle can be assembled in only three moves!