1 / 5
Top Notch Billfold, Tandy style, print in place TPU for tool changer printing — zdjęcie 1
1 / 5

Top Notch Billfold, Tandy style, print in place TPU for tool changer printing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Use PLA as support for the TPU layers

Ocena
0 / 5
Polubienia
3
Pobrania
12
Wydruki
0
Wyświetlenia
133
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Men
Licencja
Creative Commons — Public Domain

About

I like the idea of printed wallets, but I'm more traditional in my preferences for type of wallet. I like a billfold, and quite enjoyed leatherworking in the past, making lots of Tandy kits as well as custom designs. With 3d printing, you can do a lot, but I didn't really want to just make a plastic version of a leather wallet, stitched together and everything. I might as well make a leather one if I'm going to all that trouble. 

There are a lot of printable wallets and billfolds, but most of them are either parts to assemble, like the Tandy kit, or are printed vertically in order to have the fold built into the design. Printing a billfold flat on the bed doesn't work because the inner wall of the bill pocket needs to be shorter than the outer wall of the wallet, in order for it to fold properly. I realized that as I was designing this wallet, and stopped dead in my tracks when it seemed it wouldn't work.

Then I remembered the living hinge design for hard plastic prints. While TPU doesn't need the slits to bend, it CAN make use of them to expand in length around the fold line. This way, the overall length of the outside and inside can be the same, but the outside will be able to expand as needed for the fold to work well, even with a stack of bills inside!

Of course, it's even less waterproof for the contents than it was before, but I don't think anyone is expecting a billfold to protect their money from getting wet if the billfold gets wet. So, here we are!

Printing instructions

Set top layers to 0 (zero) and bottom layers to 30. This will make sure each layer is a continuous sheet of extrusion, and not broken up by what's above it. The provided 3MF already has this done for you.

After importing the "Top Notch Billfold" model, use the "Spit to parts" tool to divide it into the wallet itself, and the supports for the pockets. Assign the wallet part to your TPU material/tool, and then all the support parts to your PLA tool. You can also import the two parts, "Wallet" and "Support" and make sure they are imported as parts of the same model, and not two separate parts, then assign the tools accordingly. Don't forget to lay it flat on the plate!

Use text and/or SVG modifiers to add text or images as shown in my photos above (coming soon)  and make it a conversation starter! Just remember that your decoration also needs to be TPU.

I have provided a 3MF file that has everything configured for a Prusa XL. Just change the printer if you need to. 

When the print is complete, carefully remove the PLA support "sheets" from the pockets, and use your new Top Notch Billfold!

Now, I'm not gonna lie... removing the support sheets is a royal PITA, especially if you use silk PLA for better adhesion while printing, like I did. Once you start a separation, a little IPA dripped into the space between the PLA and TPU can help them come apart more easily. A spudger can be particularly handy for this process, but an old credit card will also help. To remove the sheets, it can be helpful to get some needle nosed pliers around the PLA sheet on one corner and "roll it up" around the pliers.

In all likelihood, you will be cursing my name during the process, so consider whether you think it's worth the trouble before printing. For a plain, single color wallet... it probably isn't. But, if you decorate it with patterns or imagery or text, then maybe it will be. :)