Wingspan Resource Tokens
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Models for the five resource tokens from the base game plus nectar from the Oceania expansion.
- Ocena
- 5 / 5
- Polubienia
- 177
- Pobrania
- 489
- Wydruki
- 8
- Wyświetlenia
- 3960
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Share Alike
Overview:
To replace the tokens in a Wingspan game you have to print 29 of the base resources (i made 30, so it's a round number) and 70 of the nectar resource. You should use different colors of filament if you can help it. Painting them is not really an option in my opinion because of the small size and difficulty of getting paint to stick to the surface when you are handling them during a game.
Size:
These tokens come in the size of 19x2.4mm by default (same diameter, about 50% thicker, compared to default cardboard).
Printing Instructions:
I used an Ender 5 with a 0.4mm nozzle with a layer height of 0.2mm. Infill isn't really relevant, but you should use at least 2 walls and 3 top/bottom layers, which makes the tokens almost solid anyway. Making them solid also gives them a more “premium” feel, they aren't as heavy as metal sandwich or resin tokens you can buy, but they feel better than the cardboard ones from the game. I recommend using ironing on the topmost layer if your settings aren't dialed in 100%. Because of the small size and non straight lines in the detail, getting everything to stick to the bed is crucial and maybe a bit tricky, depending on your printer/bed.