Makita Leaf Blower Wall Mount XBU03
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed a wall mount for my Makita leaf blower, model # XBU03.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a wall mount for my Makita blower, model XBU03. Couldn't seem to find one, so I scanned mine and made this. There are two versions. The OG and a larger flared base version. The OG version is secured to the studs in my garage. If you do not have a stud or solid wall, the flared base version would be my suggestions along with some Fischer wall anchors. Both are designed to be mounted with #8 pan or wafer head wood screws.
My print settings on my Prusa Mini in PLA were:
PLA
0.2mm layer height
8 perimeters
7 layers top and bottom
Everything else, was default
Both models could likely be printed without supports, but surface finish was a priority for me.
Enjoy!