Avalla S-360 Dual Hose Conversion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Avalla S-360 lower intake and acrylic window connector for 6" hose
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
With the recent heatwave in the UK, I purchased a portable air conditioner from Avalla, however, I noticed it was struggling to get the room temperature below 24c.
After falling down the dual hose conversion rabbit hole, I created this conversion kit for the avalla machine.
I don't know if it will work with other Avalla units, but it does work well with the S-360
The intake V4 fits onto the lower intake grille (using double sided tape around the edge, and then sealed with foil tape, and the Window bracket goes through a piece of acrylic from the outside, and then the hose slides over.
Both pieces are designed to fit with the hard plastic hose that comes with the unit, but can be used with other hoses.