E3D Revo Micro M12 Flanged Hex Nut
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replace nut for E3D Revo Micro
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 225
- Wydruki
- 0
- Wyświetlenia
- 613
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Somewhere between changing between version 1 and, version 2 - and back again - of the E3D Revo Mount for the Prusa Mini, the M12 flanged nut went missing. Personally, I think one of my cats decided to bat it around - this one probably - and I cant find it
After contacting E3D, I discovered that they do not sell the nut as a spare. Muttering, “oh what a shame” - or similar - I decided to create my own.
After a lot of failures, I have finally cracked it with this M12 Flanged Nut which I have printed several times to test it.
Print in PETG or better at a 0.1mm layer height and at least 40% infill.
NOTE: check that it is still tight on a regular basis