Slime Rancher VacPack Cosplay Gun
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
First, a slight apology, I am missing my files from the centre of the vacpack. You will have to model these yourself.…
- Ocena
- 5 / 5
- Polubienia
- 135
- Pobrania
- 317
- Wydruki
- 2
- Wyświetlenia
- 4274
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
First, a slight apology, I am missing my files from the centre of the vacpack. You will have to model these yourself. To be honest, they would have to be varied depending on the motor you have, and the gearing that works for you. Also, you will need a plastic bottle that fits inside the rings at either end. It might not be everything you need, but hopefully this will give you a helping hand.
These are the files to a Sime Rancher Vac Pack, that I made for my daughter. Having visited a ComiCon, she loved the cosplay, and wanted to go dressed up next time. Hence I made this.
A word of warning, there's probably a good 70 or 80 hours printing required for this (if not more, I lost count).
Mine includes an arduino with a motor shield, NeoPixels, and a servo to control the dial. All the electronics fit inside the ball at the back. I've not included these files, but if you're that interested, leave a comment and I'll see about posting the config files somewhere like Instructables.
Print Settings
Notes:
Printed on and Ender3 Max. I don't know if it will fit on a smaller machine. Sorry.
How I Designed This
Category: Other