Snapmaker U1 Top Cover with Active heating and exhaust DIY setup
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Top Cover for Snapmaker U1 with Active heating and exhaust DIY setup
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 993
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a concept designed for Snapmaker U1 top cover
Right now, I don't have the resources or time to build it but so will really appreciate if someone could and share any feedback. Please do let me know if there's any design changes to be made that can make this better.
This design includes active heating with PTC heater and fan as well as an exhaust fan with one way airflow so it can keep the temperature optimal. You can easily code the settings with a single cable on the snap maker custom firmware. I also added Esp32 with temperature and humidity sensor inside to monitor it remotely.
I have added the STL file of the design, please let me know if you need other files, do support and help me being this design concept to life.
Thank you!