1 / 5
Crown Graphic Lens board to M77 Helicoid. (4x5 Graflex) — zdjęcie 1
1 / 5

Crown Graphic Lens board to M77 Helicoid. (4x5 Graflex)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Attache a M77 Helicoid to your Graflex.

Ocena
0 / 5
Polubienia
2
Pobrania
4
Wydruki
0
Wyświetlenia
49
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Share Alike

I made this mostly as an aid to measure actual focus distance for camera building, but I'm sure some adventurous soul would find some photographic application for this.

I'm sharing in the hope that it might be useful.

Thread Specs.: M77x0,75
The thread on the Lensboard is designed to be tight, so thread carefully.
The thread on the retaining ring has an +0.012 diametral adjustment, it should screw on with only very little resistance.

Printing suggestions:
- 0.15mm layer height.
- Use scarf joints and randomize seam positions.
- Avoid crossing perimeters.

Tagi