Bambu H2D Magnetic Build Plate Holder

H2D Magnetic Plate Rack

Space-saving vertical storage for your Bambu H2D build plates. Designed to keep plates protected, organized, and within arm's reach of the printer.

Highlights

• Holds 4 build plates — sized for stock Bambu H2D plates (325×320mm)

• Truss-style stringers — rigid but light on filament and print time

• Magnetic mounting — glue-in pockets for 10×1.5mm neodymium discs, sticks to any ferromagnetic surface (enclosure, steel shelf, tool cabinet, workbench)

• No hardware, snap-fit assembly — just print and click together

What You Need

• 6× 10mm × 1.5mm neodymium disc magnets — N42 or stronger

• CA glue — Bambu CA500.200 recommended (or equivalent medium-viscosity cyanoacrylate) for bonding the magnets

• (Optional) a dab of the same CA on the snap-fit joints if you want a permanent bond

Print Settings

• Material: PETG or ASA. Avoid PLA if the mounting surface may exceed ~45°C / 113°F (top of a printer enclosure, sunlit workshop wall, near heat sources) — PLA will creep and sag.

• Layer height: 0.2mm

• Walls: 3

• Infill: 20% cubic

• Supports: not needed

Assembly

1. Print all parts.

2. Drop a 10×1.5mm magnet into each of the 6 pockets on the pylon feet, secure with CA500.200. Check polarity if you're mounting near another magnetic rack — align all magnets the same way.

3. Snap the stringers into the pylons — they lock in by friction, no screws needed.

4. (Optional) Add a drop of CA to each joint if you want it permanent.

5. Load plates and stick the rack to your surface of choice.

Notes

• The rack itself is not magnetic to the build plates — magnets anchor the rack to a surface, not the plates to the rack. Plates sit in the stringer slots by gravity.

• If your mounting surface is aluminum or plastic, magnets won't help — use double-sided VHB tape or screws through the feet instead.