1 / 3
Suzuki (Ignis Sport) Front Brake Rotor Spacer — zdjęcie 1
1 / 3

Suzuki (Ignis Sport) Front Brake Rotor Spacer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a front brake rotor spacer TEMPLATE for most Suzuki cars. DO NOT USE THE PRINT AS A SPACER.

Ocena
0 / 5
Polubienia
1
Pobrania
2
Wydruki
0
Wyświetlenia
84
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

This is a front brake rotor spacer TEMPLATE for most Suzuki cars. I used this for my Suzuki Ignis Sport.

After replacing my front wheel hub and bearing it would seem my brake rotor would make contact with the brake caliper bracket. The previous owner had a fender bender on that side of the car so it's possible some part of the hub or brake caliper got bent then.

As it's very uncommon to find new knuckles and brackets for this car I instead decided to shim the brake rotor a few mm out so that it no longer made contact with the bracket, at least temporarily. For my car a 1.5mm spacer out of aluminium did the trick. Steel however, is probably better.

For the love of god, PLEASE. DO NOT USE THE PRINT AS A SPACER.

Safety Disclaimer: By downloading and using this file, you accept all responsibility for the performance and safety of your vehicle.

Tagi