1 / 3
Breville Barista Touch Espresso Machine Steam Wand Funnel — zdjęcie 1
1 / 3

Breville Barista Touch Espresso Machine Steam Wand Funnel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Low profile funnel to direct water from steam wand into the drip tray

Ocena
4,5 / 5
Polubienia
27
Pobrania
151
Wydruki
2
Wyświetlenia
2073
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This may be a very niche item, but if it helps someone, that's great. My Breville espresso machine's steam wand is not exactly centered above the drain hole leading to the drip tray. Nitpicky? Maybe. First world problem? Definitely. But because of this small defect, water tends to leak underneath the drip tray during rinsing. I designed this funnel to deal with this problem and redirect any errant fluid back where it's supposed to go while still being small enough to stay out of the way of any of the machine's functions. The funnel is sized to be friction fit in the steam wand drain hole. There may be small variations in dimensions in the espresso machine from manufacturing, so if the fit isn't just right, you can try scaling the model +/- ~1% at a time.

Made for drip tray on Barista Touch. May work for other models, but I don't have access to any to test. 

Print with supports on build plate. I recommend 0.1mm layers or less to get a smoother top surface as well as a higher temp range material since it's in contact with steam; I used PETG and that's worked well.

Tagi