Standard Carry Case for the Limelight Frolic
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Standard carry case for the Limelight Frolic, intended for device carry only.
- Ocena
- 0 / 5
- Polubienia
- 0
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Standard Digital File License
This is a standard, no fluff variant of my Frolic carry case. This model is meant for carrying the device only—have a look at my upgraded case model for expanded functionality.
The case fits very snugly without pushing on any of the buttons or mouthpiece, and is virtually airtight when closed; it will mask the odors of a dirty device.
https://youtube.com/shorts/5D7wYlDeKZ4?feature=share
Print Settings (I used a Bambu A1 Mini for these prints, in two separate plates):
Orient with the flat sides facing down on the print bed.
0.20mm Standard Profile (0.20mm layer height)
2 walls
8% Rectilinear Infill, Hilbert Curve top and bottom pattern, cubic sparse infill pattern
Fuzzy skin on exterior only: Point Distance = 0.4mm, Thickness = 0.07mm
Random seam position
These settings will produce an attractive and strong but lightweight case.