Hiking pole wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fancy hiking stick wall mount with (optional) hidden screws.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 83
- Wydruki
- 2
- Wyświetlenia
- 804
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A fancy hiking stick wall mount with (optional) hidden screws.
This is designed to keep the sticks away from the wall as to avoid scraping even with the winter/snow attachment.
Comes with 3 pieces:
- base with hidden M4 countersunk screw holes
- support
- holder in 16/18/20mm variants
Pick the holder with a diameter equal or larger than the pole.
All hiking poles at my disposal measure 16mm at the top section.
The pieces come already in the recommended printing orientation. The base can be printed flat, however printing vertical will give a seamless texture to the entire piece.
The support and holder require supports on the build-plate. You might need to cleanup the base on the dovetail joint so that all pieces line-up perfectly after printing.
Assembly should be obvious, but just in case: