Nerf Rebel Ops Doom Cannon Plunger Tube Filler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filling in dead space in the plunger for future performance enhancements!
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 517
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Share Alike
There's a huge gap at the front of the plunger tube, meant to help reduce sound when firing. However, that dead space will reduce performance for hobbyists that replace the main spring, etc. This is intended to fill in the gap without harming airflow.
Once you've removed the plunger tube:
-Carefully unclip the tube cap, and take care to not let the various springs and bits scatter.
-Use snips or needle nose pliers to clip out the spring base plate. Use a file to clean up the remaining plastic.
-Add the printed pieces in order, as pictured. The final piece (tube with extra bits) will lock everything in place.
-You can add the springs and the orange safety valve bits back if desired, to maintain your ARs. Otherwise, replace the plunger tube cap.