Council FOGO Bin Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple little clip to allow airflow into the council FOGO bin, stopping garden waste from turning into soup.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple clip that raises the lid of a 240 L council FOGO bin by approximately 25 mm, allowing airflow to reduce moisture build-up and help prevent garden waste from turning into a smelly soup during winter.
I originally printed in PLA, and have tested for a few months. It held up quite well; something stronger might be needed for the summer months.
The taper on the bin lid allows the clip to slide into place on each side, and sit consistently so that it doesn't warp the lid; however, different bins may have different sides.
Printed with no supports and 30% infill.