Ventilated Cover for Raspberry Pi 4B HighPi Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement for the mass-produced, injection-molded HighPi cover which features holes for heat dissipation.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 284
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Here we have a replacement cover for the HighPi Raspberry Pi 4B case sold by pishop.us as SKU 9005 for $10. The original case cover is replaced with this one to have ventilation holes. The cover snaps into place so a strong, flexible filament like PETG is recommended. To further address heat issues without adding a fan, I have combined this cover with the use of stick-on aluminum heatsinks.
My only fabrication experience has been using PETG with the Prusa slicer using default Quality settings for 0.2mm layer thickness.