ZMR250 Shoes - Weatherproof your ZMR
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Skids for the ZMR250 frame including double motor protection. Just like user Judar (from the source file) I had…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 205
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Skids for the ZMR250 frame including double motor protection.
Just like user Judar (from the source file) I had problems with the moist ground and getting mud in my motors. The side panels will protect your motors from dirt and also functions as a bumper when crashing into something hard.
It was an easy step to add the legs to lift the quad somewhat more from the (wet) grass.
Version 2
I made a new version which is lighter, stronger, sleeker and way better to print! I included two versions for respectively 16-12mm and 19-16mm holes. The 16-12mm will fit the DYS1806 motors, the 19-16mm should fit 2204 and 2206 motor.
Make sure to rotate the object (135°) in your slicer software in a way that it stands on the one flat surface and it will be printed clean and strong!
The _thick files are as requested by davidjormi, with 33% thicker walls. The normal version is strong enough for me in PLA with 20% infill, so please let me know when you print these versions and how they fit!
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Notes:
For the version 2s, make sure that you align the model on its flat surface.
Custom Section
Check out Tech2C's video featuring my design!
Category: R/C Vehicles