Bit Holding Case - Amana Tool AMS-620 Master Countersink Set

Case to hold the bits and wrenches included in Amana Tool's AMS-620 Countersink Master Set.

As noted, this is a mashup design the incorporates previously release models that needed to be heavily modified to achieve the desired outcome.

Recommendations for Printing:

    Material: PLA for all but the seal which needs to be TPU or a similar flexible material (but feel free to use what you want)

    Layer Height: 0.16 mm or 0.20 mm

    Nozzle: 0.4 mm  (mostly for definition of text and artwork)

    Number of Walls: 3

    Infill Density: 15%

    Top & Bottom Thickness: ~0.6 mm or 3-4 layers

    Wall Generator:  Arachne

    Order of Walls: outer/inner

    Supports: Not required

Use Lilly Pads on the Lower Case (Box) and Lid in the areas for the ribs, hinges, and latch for improved print quality.  See included picture for details.

For the Latches, place on edge on the build plate and use a brim.

The Plate is placed and  glued to the inside of the Lower Case (Box).  The Plate was added to create contrast and to take advantage of the text definition when printing face down on the build plate.

If you do not want the logo or flag that is on the bottom the the case, in your slicer paint them the same as the base color for the case.  Your should get minimal to no artifacts by doing this.

Only hardware required are (6) M3-0.5 x 35 mm machine screws.  I chose to use Stainless Steel Button Head Cap Screws (BHCS). But you can choose black oxide steel and/or Socket Head Cap Screws (SHCS) for the screw type and material.  Maker's choice.

This model and/or the items created from this model are not available for commercial sale in any form.