1 / 3
Midea PortaSplit Silicone Antivibration Feet — zdjęcie 1
1 / 3

Midea PortaSplit Silicone Antivibration Feet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Just a simple mould to cast antivibration feet for the Midea MultiSplit, can be used with other appliances of course.

Ocena
0 / 5
Polubienia
0
Pobrania
11
Wydruki
0
Wyświetlenia
163
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Because of the compressor in the inner Unit, there is some vibration, which gets transmitted on my wood floor, so I quickly designed some moulds to cast silicone feet.
They use similar dimensions as those included silicone Rings that are meant to stop it from rolling around. I just used some random 2-Part Silicone I had laying around (they have a shelf life, and after opening should be used after a some months!).

The Moulds are rather crudly designed, but I thought it might be useful to someone.

Instructions
  1. Print the mould cup 4 times

  2. Smear the inside surfaces with vaseline as mould release, wipe the excess vaseline with some paper towels (optional for Silicone, required for PU)

  3. Mix 2-Part silicone (or 2-Part PU, or what ever), 300ml are required, so you might want to mix 320ml, just in case (75ml is needed per foot).

  4. Pour the silicone until it's flush with the edge

  5. Let it cure and pull the feet out of the moulds, if you use rather soft silicone (I used Shore 15A), it should be quite easy to push it from the top inwards and grab the side a bit, do the around the mould until it pops out. If requested I would redesign it for you to be a 2 Part mould, which would would make it much easier to release the casted part. But I already made mine, so I didn't redesign it yet >.<

PS: Yes, they fully eliminated all vibrations.

Cheers~

Tagi